Medium Pressure Filters (Pressures to 1550 Bar)

MAXIMATOR series of medium pressure line filters >> Pressures to 22,500 PSI (1500 bar) come in Dual Disc Line Filters, Cup-Type Line Filters or Angel Filters

Material:

• The body, cover and glands: 316L series stainless steel
• The elements: 316 stinless steel.
• Filters are rated for temperatures -252°C to 350°C
• All Line Filters come with glands and collars

Dual-Disc Line Filters

MAXIMATOR medium pressure dual-disc line filters are used to filter process fluids in high pressure systems. This design helps remove the large particles first through a coarse primary disc, which then allows a secondary disc to provide a smaller micron filtration. These filter elements are designed to withstand pressure surges without cracking, flaking, or rupturing. Filter elements come in the following sizes: 5/8, 8/30, 30/56 (secondary/primary).

Advantages

• Two step filtration
• Larger particles do not clog the fine filter (cascade filtration)

Technical data

MAXIMATOR Cup-Type Line Filters

MAXIMATOR medium pressure cup-type line filters are used when maximum filtration surface area and a single micron size element is preferred. This design increases the filter area as much as 6 times the area of the disc type filter, and will permit high flow rates with lower pressure drop, and longer intervals between element changes. Filter elements come standard in 5, 30 or 56 micron sizes are easily replaced.

Advantages

• Large filter surface

Technical data

MAXIMATOR Cup-Type Line Filters

MAXIMATOR medium pressure cup-type line filters are used when maximum filtration surface area and a single micron size element is preferred. This design increases the filter area as much as 6 times the area of the disc type filter, and will permit high flow rates with lower pressure drop, and longer intervals between element changes. Filter elements come standard in 5, 30 or 56 micron sizes are easily replaced.

Technical data

Advantages

• Large filter surface

MAXIMATOR medium pressure Angle Filters are used to filter gases or liquids in high pressure systems. The filter elements can be easily changed in-situ. The special design allows the exchange of the filter element without the need to first disassemble the filter in front of the tubing. Filter elements are made of sintered material with pore sizes of 5 μm, 30 μm or 56 μm.