MTS Perforator PGP 30/40 Pneumatic Gear Pump
The mts PERFORATOR PGP 30/40 is a powerful gear pump for the inection of 2-component injection materials. It can be used with Polyurethan, Silicate resin. It has a Max Operating pressure of 1,740 psi. with a Max flow rate of 40 l/min at max 40 bar/580 psi.
General Information
Pneumatic Gear Injection Pump PGP 30/40
Pneumatic Gear Injection Pump PGP 30/40 LC
General Information
The mts PERFORATOR PGP 30/40 is a powerful gear pump for the injection of 2-component injection materials, mainly used for mining and civil engineering applications. It is meant for the use with common 2-component polyurethane injection materials with a mix ratio of 1:1
Applications for Resin Injection include:
- Rock or concrete consolidation
- Stop water ingress
- Roof support
- Gravel bonding
- Cavity Filling
Pneumatic Gear Injection Pump PGP 30/40
| Pneumatic Gear Injection Pump PGP 30/40 | |
|---|---|
| Description | The pressure injection pump PGP 30/40 is an pneumatic driven 2- component gear pump, suitable for the work under mining and civil engineering conditions. It consists of a powerful 8kW pneumatic drive and two mining approved high capacity gear pumps.With its high constant flow rate of 40 l/min at a pressure up to 40 bar, it is the perfect pump for all injections works where you must be able to pump a lot material in a short time frame. Of course this pump can be uses with all common Polyurethane injection resins.With additional gear pumps, that can be purchased optional, it is also possible to use this pump with injection resins which need a mixing ratio od 2:1 or 4:1. For safety reasons this machine is equipped with overpressure valves at both pressure outlets, and a mining approved pressure switch. |
| Air drive pressure | 1-5 bar |
| max. pressure at 5 bar inlet pressure | 120 bar |
| max. flow rate at max. 40 bar | 40 l/min |
| LxWxH | 1200x500x500mm |
| Weight | 130 kg |
Pneumatic Gear Injection Pump PGP 30/40 LC
| Pneumatic Gear Injection Pump PGP 30/40 LC | |
|---|---|
| Description | The pressure injection pump PGP 30/40 is an pneumatic driven 2- component gear pump, suitable for the work under mining and civil engineering conditions. It consists of a powerful 8kW pneumatic drive and two mining approved high capacity gear pumps.With its high constant flow rate of 40 l/min at a pressure up to 40 bar, it is the perfect pump for all injections works where you must be able to pump a lot material in a short time frame. Of course this pump can be uses with all common Polyurethane injection resins.With additional gear pumps, that can be purchased optional, it is also possible to use this pump with injection resins which need a mixing ratio od 2:1 or 4:1. |
| Air drive pressure | 1-5 bar |
| max. pressure at 5 bar inlet pressure | 120 bar |
| max. flow rate at max. 40 bar | 40 l/min |
| LxWxH | 1200x500x500mm |
| Weight | 125 kg |
Enquire about this product
Fill in the enquiry form below and one of our friendly staff will be in touch to discuss your requirements. If you are enquiring about a specific product SKU please refer to the product datasheet and include these details in your enquiry message.