1 Inch Valves, Fittings & Tubing (Pressures to 2965 Bar)
1″ Maximator stainless steel high pressure valves Fittings and Tubing. Pressure to 43,000 psi (2,965 bar). Suitable for both gases and liquids applications.
High Pressure Stainless Steel Valves, Fittings and Tubing >> Pressures to 43,000 psi (2965 bar)
- Needle Valves
- Fittings
- Tubing
- Coned and Threaded Nipples
- Check valves
- Anti-vibration fittings and safety head assemblies.
High Pressure Valves >> Pressures to 43,000 psi (2,965 bar)
Maximator high pressure valves with metal to metal seats have a high level of sfety and reliability under adverse operating conditions. These valves my be used both with gases and liquids.
All high pressure needle valves include glands and collars.
Ordering Information Typical Catalog Number: 43V16M072
| 43V Valve Series |
16M O.D Tube Size |
07 Stem Type |
2 Body Pattern |
|---|---|---|---|
| 43 V | 16M – 1 “ | 07 – Vee Stem | 1 – two-way straight |
| 08 – Regulating Stem | 2 – two-way angle | ||
| 87 – Vee Stem with replaceable stem | 3 – three-way, two on pressure | ||
| 88 – Regulating Stem with replaceable seat * | 4 – three-way, on on pressure | ||
| 5 – three-way, two-stem manifold |
* Tapered tip for regulating and shutoff
| O.D. Size in. (mm) |
Connection type |
Orifice Size in. (mm) |
Rated Cv** |
Pressure Rating @ R.T psi (bar) *** |
|---|---|---|---|---|
| 1 (24.5) | 16MF | 0.438 (11.1) | 2.6 | 43,000 (2965 |
** Cv values shown are for 2-way straight pattern vee stem valves.
For 2-way angle patterns, increase the Cv value by 50%.
*** See page 2 in the Technical section of the cataloge for pressure/temperature rating chart.
1″ High Pressure Fittings >> Pressures to 43,000 psi (2,965 bar)
Maximator high pressure fittings are designed to be used with the 43V series high pressure valves and high pressure tubings.
All high pressure fittings have coned and threaded type connections. Mounting holes are standard on all elbows, tees and crosses.
1″ High Pressure Anti Vibration Collet and Safety Head Assembly >> Pressures to 43,000 psi (2,965 bar)
Anti-Vibration collet gland assemblies are for use in applications where there could be extreme external mechanical vibrations or shock in tubing lines. These collet gland assemblies are interchangeable with the standard high pressure coned and threaded tube connections.
1″ High Pressure Check Valves >> Pressures to 43,000 psi (2,965 bar)
- Opening pressure of Check Valves is approx 20 psi (1.5bar)
- Body, Cover, poppet, Gland: 316 stainless steel
- Spring: 300 Series stainless steel
- Supplied with glands and collars
O-Ring style Check Valves: Provide high quality direction flow control and thigh shut-off for liquids and gases.
O-Ring material is FKM -20°C to 200°C
Ball Check Valves: prevent reverse flow where bubble tight shut-off is not mandatory. These Check Valves are designed with a ball cradled floating poppet to assure positive inline seating. This poppet design allows full flow around the ball to minimise pressure drop. Check Valves are rated to 350°C.
1″ High Pressure Tubing >> Pressures to 43,000 psi (2,965 bar)
Maximator offers a line of cold drawn thick walled tubing, with flow areas to compliment the 43000 psi high pressure valves and fittings series. This tubing is made under strict manufacturing and quality control standards and inspections, with dimensional tolerances to match the requirements of high pressure coned and threaded connections.
1″ High Pressure Coned and Threaded Nipples >> Pressures to 43,000 psi (2,965 bar)
Maximator offers a line of coned and threaded high pressure tube nipples in a variety of lengths for all standard tube sizes.
The coned and threaded high pressure tube nipples are available in 316 stainless steel.
Special length coned and threaded nipples are available upon request.
