Additel ADT121 Pneumatic Pressure Manifold
Additel ADT121 has a filter built-in to the pneumatic pressure manifolds to prevent contamination introduced by devices under test. There are four hand-tight quick connectors pre-installed on each manifold allow you to connect without the use of wrenches or Teflon tape which increases your productivity when using calibration pumps, pressure controllers, dead weight testers, or piston gauges.
The ADT121 series pressure manifolds are designed for expanding pressure test ports during pressure calibration. The Additel 121 for pneumatic pressure calibration up to 3000 psi (200bar).
A filter is built-in with the ADT121 to prevent contamination introduced by devices under test. There are four hand-tight quick connectors pre-installed on each manifold allowing you to connect without the use of wrenches or Teflon tape which increases your productivity when using calibration pumps, pressure controllers, dead weight testers, or piston gauges.
| Part Number | Description |
|---|---|
| ADT121-N | 1/4 NPT male hose to four 1/4 NPT female hand-tight quick connectors |
| ADT121-N2 | 1/2 NPT male hose to four 1/2 NPT female hand-tight quick connectors |
| ADT121-M | M20 x 1.5 male hose to four M20 x 1.5 female hand-tight quick connectors |
| ADT121-B | 1/4 BSP male hose to four 1/4 BSP female hand-tight quick connectors |
| ADT121-B2 | 1/2 BSP male hose to four 1/2 BSP female hand-tight quick coonectors |
Note: A test hose is included with every ADT121 pressure manifold.
