MTS Perforator GSF-35-2-PU Pneumatic Piston Injection Pump
The mts PERFORATOR 2-Component Injection Piston Pump GSF35 PU-N pump is a compact & lightweight injection pump for use with Polyurethan or Silicate resin. It is equipped with threaded and Steeck-O connectors it can be used in civil projects as well as mining.
The mts PERFORATOR 2-Component Injection Piston Pump GSF35 PU-N pump is a compact & lightweight injection pump for use with Polyurethan or Silicate resin. It is equipped with threaded and Steeck-O connectors it can be used in civil projects as well as mining.
The Advantages of the GSF35 PU-N pump is that they are very easy and safe to use. They have a max. operating puressure of 2,900 psi (205 bar) with a max. flow rate of 8 l/min.
Applications for Resin Injection include:
- Rock or concrete consolidation
- Stop water ingress
- Roof support
- Gravel bonding
- Cavity Filling
| Pneumatic Piston Injection pump GSF 35-2 PU | |
|---|---|
| Description | The pressure injection pump Type GSF 35-2 PU is a pneumatically driven, single acting piston pump that operates after the pressure intensification principle. The area ratio of drive pressure to pressure piston ring area yields the pressure ratio which is 41:1 in type GSF 35-2 PU pumps.
The pump consists of a pneumatically actuated drive part and a high-pressure part. Drive part and high-pressure part are linked with a piston rod. Two parallel high-pressure pistons are arranged at the end of the piston rod and are connected via a yoke. Thus, the drive and high-pressure parts are isolated and it is prevented that pump medium gets into the pneumatic drive part in case of leakages in the high-pressure sealing. The piston rods are of high-tensile stainless steel and boast long service lives. The valve seats are of tempered steel and the seals are wear resistant UHMW-PE. |
| Air drive pressure | 1-6 bar |
| max. pressure at 5 bar inlet pressure | 205 bar |
| max. flow rate with free outlet | 8 l/min |
| LxWxH | 720x330x370mm |
| Weight | 84 kg |
