Medium Pressure Valves, Fittings and Tubing (Pressures to 1550 Bar)
1 1/2″ Maximator stainless steel high pressure valves Fittings and Tubing. Pressure to 15,200 psi (1,050 bar). Suitable for both gases and liquids applications.
Medium Pressure Stainless Steel Valves, Fittings and Tubing >> Pressures to 15,200 psi (1050 bar)
- Needle Valves
- Fittings
- Tubing
- Coned and Threaded Nipples
- Check valves
- Anti-vibration fittings and safety head assemblies.
Medium Pressure Valves >> Pressures to 15,200 psi (1,050 bar)
Maximator 318 Duplex stainless steel* high pressure needle valves with metal to metal seats have a high level of safety and reliability under adverse operating conditions. These valves may be used with gases and liquids.
Traceability is ensured through extensively documented data (batch number, max. pressure, material number, type designation). All high pressure valves included glands and collars.
Material:
Body: 318 Duplex stainless steel*
*Please consult factory for using the 24M series for hydrogen application. The standard 24M valves are not suitable for hydrogen service.
1 1/2″ Medium Pressure Fittings >> Pressures to 15,200 psi (1,050 bar)
Maximator high pressure fittings are designed to be used with the 15V series high pressure valves and high pressure tubings.
All high pressure fittings have coned and threaded type connections. Mounting holes are standard on all elbows, tees and crosses.
1 1/2″ Medium Pressure Anti Vibration Collet and Safety Head Assembly >> Pressures to 15,200 psi (1,050 bar)
Anti-Vibration collet gland assemblies are for use in applications where there could be extreme external mechanical vibrations or shock in tubing lines. These collet gland assemblies are interchangeable with the standard high pressure coned and threaded tube connections.
1 1/2″ Medium Pressure Check Valves >> Pressures to 15,200 psi (1,050 bar)
- Opening pressure of Check Valves is approx 20 psi (1.5bar)
- Body, Cover, Gland: 318 Duplex stainless steel
- Cover, poppet: 316L Stainless steel
- Spring: 300 Series stainless steel
- Supplied with glands and collars
Note: These check valves are not to be used as a relief device
O-Ring style Check Valves: Provide high quality direction flow control and thigh shut-off for liquids and gases.
O-Ring material is FKM -20°C to 200°C
Ball Check Valves: prevent reverse flow where bubble tight shut-off is not mandatory. These Check Valves are designed with a ball cradled floating poppet to assure positive inline seating. This poppet design allows full flow around the ball to minimise pressure drop. Check Valves are rated to 350°C.
1 1/2″ Medium Pressure Tubing >> Pressures to 15,200 psi (1,050 bar)
Maximator offers a line of cold drawn thick walled tubing, with flow areas to compliment the 15200 psi high pressure valves and fittings series. This tubing is made under strict manufacturing and quality control standards and inspections, with dimensional tolerances to match the requirements of high pressure coned and threaded connections. Maximator offers this tubing made of 316L (High Nickel) which is especially suited for hydrogen service
1 1/2″ Medium Pressure Coned and Threaded Nipples >> Pressures to 15,200 psi (1,050 bar)
Maximator offers a line of coned and threaded high pressure tube nipples in a variety of lengths for all standard tube sizes.
The coned and threaded high pressure tube nipples are available in 316 stainless steel. See chart below for order information.
Maximator offers this high pressure nipples made of 316L (High Nickel) which is especially suited for hydrogen services.
Special length coned and threaded nipples are available upon request.
